雙輥筒網帶復合機 水膠貼合機詳細介紹

適用膠型：水性白乳膠

復合范圍：海綿、布類、人革、無紡布、EVA等加厚材料需要雙烘筒再次加溫的復合。

主要配置：1放料裝置：機架、導布輥.、大力拑。

2.上膠裝置：膠輥花紋***細致，用不銹鋼刮刀，******，刮膠均勻。

3.牽引裝置：動力牽引。

4.烘筒壓合：烘筒內裝有電機熱管30根，預熱時間短，烘筒內加裝灌裝導熱油，使兩端與表面溫度基本 保持一致。需加價1.5左右

5.傳動部分：采用國產變頻器調速電機，變頻聯動，機器同步運轉平穩。

6.切邊裝置：在復合后材料收卷前切邊，加價8000，裝有調整手柄易于操作，切邊時不卡滯，廢料能順利落地。

7.收卷裝置：采用磁粉張力氣漲軸中心收卷，加價5000，并采用液壓自動對邊，卷布效果好。準確方便。加價8000

主要技術參數：

     有效幅寬1700

     烘筒規格￠1500×1850

     加熱功率45kw

    傳動功率3+2.2+1+1.5kw

    復合速度0-25米／min

    機器總長7.5m

 免費安裝調試，保修一年。

Suitable adhesive type: water based white latex compound range: sponge, cloth, human leather, non-woven fabric, EVA and other thickening materials need double baking cylinder to warm again. Main configuration: 1 feeding device: frame, guide roller, strong claws. Glue device 2.: roller pattern precision meticulous, with stainless steel scraper, durable, uniform frictioning. 3. traction device: power traction. 4. drying tube pressing: the oven is equipped with 30 heat pipes with electric motor, and the heating time is short. The heat transfer oil is installed in the oven to keep the temperature of the two ends and the surface temperature basically consistent. It needs to increase the price of 1.5 or so 5. transmission parts: using domestic frequency converter motor, frequency conversion linkage, machine synchronous operation smooth. 6. cutting edge device: cut the edge before the composite material is reel, the price is 8000, the adjustment handle is easy to operate, the cutting edge is not stagnant, the waste can be landed smoothly. 7. winding device: a magnetic sheet strength center shaft winding up, increase 5000, and the use of hydraulic automatic edge rolling, good effect. It is accurate and convenient. 8000 main technical parameters are added:

Effective width of 1700 cylinder 1500 x 1850 specifications of heating power 45KW transmission power 3+2.2+1+1.5kw composite speed of 0-25 M / min machine chief 7.5m 

free installation, warranty for one year.

聯系人：朱先生

聯系電話：13851340306（微信）

QQ:169133128

官方網站：