The handheld 35RDC is a simple Go/No-Go ultrasonic instrument designed to detect subsurface defects caused by impact damage on solid laminate aircraft composite structures. The 35RDC features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage. It uses an ultrasonic transducer that can be placed or scanned on the area of composite material suspected of having impact damage. Weighing only 0.24 Kg (8.5 oz.) and featuring a simplified keypad, this rugged ultrasonic instrument is easy to operate and requires minimal training. 35rdc 復合材料損傷檢測儀手持式35rdc 是一種簡單的通用 / 不通用超聲波儀器,用于檢測沖擊損傷對固體層壓板飛機復合材料結構造成的表面缺陷。 35rdc 有一個背光 lcd,如果沒有發現地下損傷,它會顯示“好”這個詞,如果檢測到地下損傷,它會顯示“壞”這個詞。 它使用一個超聲波換能器,可以放置或掃描在懷疑有撞擊損壞的復合材料區域。 重量只有0.24公斤(8.5盎司) 這種堅固耐用的超聲波儀 OLYMPUS 35RDC型超聲波缺陷檢測儀OLYMPUS 35RDC型超聲波缺陷檢測儀它通常用于以5 MHz的寬帶接觸傳感器,零件編號V109,包,可以放置或復合材料具有沖擊損傷可疑地區進行掃描。 厚度的復合材料,可測試范圍為0.025英寸到0.900英寸(0.063毫米到22.8毫米)。僅重0.24千克(8.5盎司),在35RDC型超聲波缺陷檢測儀功能簡單的一鍵校準和電池壽命長,一般150小時。 35RDC型超聲波缺陷檢測儀C獨特的特點是“在屏幕上讀出了”超越加州的厚度。 讀出的材料表明,被測試薄或厚比是校準。此功能可避免不佳閱讀在沒有內部損害的證據。 Theory of operation理論操作 當高頻率的脈沖由超聲波傳感器產生的固體進入層壓復合片結合,它將穿越材料,直到它遇到空中邊界,此時它反映了早在一個可以檢測回聲一計。 在固體材料的結構情況下,這種思考將來自后墻或層壓板的內表面。但是,如果有一個分層開裂或地下平行于表面,然后反射會,而不是從損壞的地區,在較早的時間到達。從良好的損壞材料與回聲模式差異可以用來確定內部損害,不從表面明顯的領域。 默認警報示范35RDC設置將響應分層的復合材料的名義內發生兩層厚度從后墻緩沖區,以適應變化的速度,輕微的厚度變化,或簾布下降。 35RDC型超聲波缺陷檢測儀C獨特的特點是“在屏幕上讀出了”超越加州的厚度。 讀出的材料表明,被測試薄或厚比是校準。此功能可避免不佳閱讀在沒有內部損害的證據。 Theory of operation理論操作 當高頻率的脈沖由超聲波傳感器產生的固體進入層壓復合片結合,它將穿越材料,直到它遇到空中邊界,此時它反映了早在一個可以檢測回聲一計。 在固體材料的結構情況下,這種思考將來自后墻或層壓板的內表面。但是,如果有一個分層開裂或地下平行于表面,然后反射會,而不是從損壞的地區,在較早的時間到達。從良好的損壞材料與回聲模式差異可以用來確定內部損害,不從表面明顯的領域。 默認警報示范35RDC設置將響應分層的復合材料的名義內發生兩層厚度從后墻緩沖區,以適應變化的速度,輕微的厚度變化,或簾布下降。 Features · For use on solid laminate structure aerospace composites · Simple one-button calibration · Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.) · Simple Good/Bad/Beyond Cal display readout · Back light matrix display with user help text · AA battery operation · Handheld, weighing only 0.24 Kg (8.5 oz.) · Energy saving Auto Power off feature · Long battery life, 150 hours typical · Battery life indicator 超聲復合材料探傷儀 航空航天復合材料單按鈕校準厚度范圍0.63 mm 至22.8 mm (0.025英寸)。 0.900 in。) 簡單的好 / 壞 / 超越卡顯示讀出背光矩陣顯示器與用戶幫助文字一個電池操作手持式, 重量只有0.24公斤(8.5盎司) 節能自動斷電功能, 電池壽命長, 150小時, 典型的電池 
General | Environmental IP65 compliant | Splash-proof, impact-resistant case. Sealed, color-coded keypad | | Operating Temperature Range | -10° C to +50° C (+14° F to 122° F) | | Size: (W x L x H) | 84 mm x 152 mm x 84 mm (3.31 in. x 6.0 in. x 1.50 in.) | | Weight | 0.24 kg (8.5 oz) | | Standard Inclusions | Wrist strap, 3 AA batteries, 5 MHz transducer, transducer cable, couplant, carrying case, rubber protective boot with neck strap, instruction manual, two-year limited warranty | | Display Modes | · Digital Readout Good, Bad or Beyond CAL thickness · Advanced user setting shows A-scan or waveform. For use by qualified NDT personnel only. | | Thickness Measurement Range** | 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.) ** Thickness range depends on material, transducer, and surface conditions. | | Material Velocity | Fixed velocity for carbon fiber aerospace composite | | Transducer Frequency | 5.0 MHz | | Measurement Update Rate | 20 Hz | | Deviation alarm set points | Programmable +/- from calibration point. Set in advance setup | Power Supply | Battery | 3 AA alkaline or NiMH batteries | | Operating Time | 150 hours typical battery life; 30 hours continuous with backlight on | | Low Battery Indicator | Continuously indicates battery status | | Battery Saver | Auto Power Off/Continuous On | | AC Power Supply | Optional | Optional Accessories USB/ADP-115: AC-115 power supply USB/ADP-230: AC-230 power supply *All specifications are subject to change without notice. Olympus NDT offers a complete selection of transducers, cables, couplants, calibration test blocks, and accessories to meet a wide variety of ultrasonic precision thickness gaging applications. Precision Thickness Gage Transducers · Contact Transducers · Delay Line · Immersion Transducers · Test Blocks & Cables |