莆田市仙游縣.城廂區、秀嶼區、  荔城區、涵江區莆田市加德士供銷中心齒輪油產品的聯系電話

一、工業齒輪油產品特點

本產品由HVI精制礦物油為基礎油，加入Afton復合添加劑調制而成。

具有極壓、抗磨性，在邊界潤滑條件下于金屬表面生成極壓膜，防止燒結和減少磨損，熱氧化安全性好，能在較高溫度下使用，抗乳化性優良、抗泡、防銹性、抗腐性好。

二、工業齒輪油使用注意事項

正確選用產品規格，并嚴格遵守規定；產品運行中需要定期檢測產品的理化性能，嚴禁超限使用，確保產品的正常使用壽命。

在使用過程中應認真檢查，嚴防水、酸、堿及低沸點物混合入使用系統，并加裝過濾裝置，防止機械雜物進入，確保油品純度。

運輸過程中該產品必須有明顯的標記，防止其它種類的石油產品的混入。

用戶一定要嚴格遵守上述注意事項安全操作。

三、工業齒輪油用途It has extreme pressure and abrasion resistance. It generates extreme pressure film on the metal surface under boundary lubrication conditions, prevents sintering and reduces wear, has good thermal oxidation safety, and can be used at higher temperatures. It has excellent emulsification resistance, bubble resistance, rust resistance, and corrosion resistance. good.
Attention to the Use of Industrial Gear Oil
Choose product specifications correctly and strictly follow the regulations. During the operation of the product, the physical and chemical properties of the product must be regularly tested, and the use of the product is strictly prohibited to ensure the normal service life of the product.
During the use process, it should be carefully checked, strictly waterproof, acid, alkali, and low-boiling point mixture into the use system, and a filtration device should be installed to prevent mechanical debris from entering and ensure the purity of the oil.
The product must be clearly marked during transportation to prevent the mixing of other types of petroleum products.
Users must strictly comply with the above precautions.

L-CKC系統工業齒輪油適用于齒面接觸應力小于1100MPa的礦山等機械的齒輪轉動潤滑，如冶金、水泥、煤礦、化纖等機械的齒輪傳動裝置的潤滑。

L-CKD重負荷工業齒輪油適用于齒面接觸應力大于1100MPa的極壓閉式工業齒輪潤滑，特別是油溫較高的重負荷及有反復沖擊負荷的，要求有優良抗乳化性能的低、中速閉式工業齒輪，如冶金、水泥、煤礦、化纖和化肥等大型工業引進設備的齒輪裝置的（硫磷型）潤滑油。

  按粘度等級分為68、100、150、220、320、460、680共7個牌號。