Z7127

尊敬的客戶您好！人海茫茫，眾生蕓蕓，遇見你，真的像赴那個偶然中必然的緣。而緣分，讓你我相遇。期待您的來電！珍惜這得來不易的緣。

F6217

In recent years, with the development of computer technology and the continuous improvement of automation requirements of users, digital electro-hydraulic control systems have been applied to small and medium-sized steam turbines, especially to extraction and combined cycle units. From the point of view of control system, the regulating system is a multi-variable control system. The control quality of the hydraulic regulating system is not high, for example, the thermoelectricity load regulation produces coupling, the self-adjustment is not enough, the regulation system is only proportional regulation, the regulation accuracy is not high, the overregulation quantity is large, the regulation time is too long, the high and low pressure oil motors are not synchronized, and once the regulation parameters are adjusted in the factory, it is difficult to change the scene, which is especially outstanding in the extraction steam turbine, it is difficult for users to operate and use. Due to the fact that the full hydraulic regulating unit can only realize proportional regulation, and the regulating range of synchronizer is limited generally 96%-106% , the regulation parameters of 9MPa inlet steam parameters in 50MW high pressure unit can not meet the operation requirements under rated initial and final parameters, such as unsatisfied load or unsatisfied load. Compared with the traditional hydraulic control system, the digital electro-hydraulic control system uses the digital computer technology as the foundation to realize the loop variable adjustment and the system static self-adjustment, etc. , the Control Law and parameters such as decoupling coefficient are realized by software with high accuracy and can realize complete static self-adjustment. The static and dynamic performance of the system is greatly improved by adopting proportional integral and differential PID regulator, the overshoot of the system is decreased, the stability is enhanced, and the process time is shortened. The control system of DEH-NTK steam turbine consists of computer control part and EH hydraulic actuator. Deh-ntk control system includes data acquisition DAS, digital electro-hydraulic Control System Deh, turbine trip protection system ETS and turbine safety test system TSI. The DEH-NTK control system is equipped with a perfect system boot, after the operator is on the power station, the system can start up normally to the control screen without the operator's intervention, because all the hot keys of the system are shielded reliably, therefore, no attempt should be made to exit the system. The structure of DEH-NTK system mainly includes redundant power supply, two pairs of controller DPU, I / O Card Ai Card, Pi Card, AO card, Di Card, DO card, backup manual control plate, Terminal Plate servo amplification, overspeed protection, vibration, differential expansion, axial displacement, OPC, an operator station including printer.

193-EC3HG
193-EC3GG
193-EC3GF
193-EC3FF
193-EC3EE
193-EC3DE
193-EC3DD
193-EC3CD
193-EC3CB
193-EC1DD
193-EC1CD
193-EC1CB
193-EC1BD
193-EC1BB
193-EC1AD
193-EC1AB
191S-DND3-DC20C-R
191S-CNKF3-CC16C
191S-CNEJ3-DB40C

Z7127

Z7127