安裝與說明 Installation and instruction

一、小心打開本機器的外包箱，并清點下列附件：

Please open outer packing box of this machine carefully,and check out these following accessories:

1、操作說明書一份

a copy of operation manual

2、產品保證書一份

a copy of product warranty

3、機器一臺

a set of machine

4、電源線一條

a power line

5、零件托料盤兩個

two pieces of parts trays

6、六角扳手一支

one hexagon wrench

二、檢查機器的使用電壓規格[AC110V或AC220V]應與市電之電壓規格相符

Please check out whether the voltage specification of the machine [AC110V或AC220V] is the same as the voltage specification used in your city

三、當市電之電壓規格爲AC110V或AC220V時，請將計數器后面的電源切換到115V或230V的位置。

When the voltage specification of your city is AC110V or AC220V, please shift the power switch in the back of the counter to 115V or 230V

四、機器置于平穩桌面或地面。

Please place the machine on a smooth table or ground.

五、附件及電壓規格確認后，請將電源線兩端分別接在機器的電源輸入插座及市電的電源輸出插座上

After confirmation of all accessories and voltage specification,please connect the two ends of the power cord to power input socket of the machine and power output socket of your city.

3

六、將地線確實接妥

Please connect the ground wire securely

七、兩料盤支架關節的定選鈕逆時針轉松，將兩料盤支架展開成一字再將固定旋鈕順時針轉緊

Loosen the fixed swiveling button on the support bracket of the two material trays in counter clockwise direction.stretch out support bracket of the two material trays to a straight line and then fasten the fixed swiveling button in clockwise direction

八、打開面板上的電源開關后，顯示幕應顯示出上次的間距（PITCH）設定值

Turn on the power switch on the panel,and then the screen is supposed to display the PITCH set at the last time.