本特利傳感器177230-01-01-CN

177230振動探頭的特點包括：

易于實施和使用
- 與PLC和控制系統（如DCS和SCADA）的接口
- 通過類似于連接其他PLC或控制系統輸入的熟悉界面，為作和維護提供快速學習曲線
- 不需要現場配置或調整
- 完整系統需要額外的零件
- 包括為客戶提供的技術支持
監視他們的設備
- 包括自檢
- 包含受保護的界面
- 支持各種接口電纜
數據質量
- 提供準確和可重復的數據
- 使用簡單的數據格式
- 提供原始振動信號進行驗證和分析
符合EHS標準
- 實現安全和符合人體工程學的設計
- 支持進入危險區域
強大的CM設計可靠性
實現工業標準的4至20mA環路供電變送器

本特利振動探頭是一種簡單的環路供電設備，易于安裝和維護可降低培訓和服務成本。當集成到整個工廠資產狀況監測解決方案的PLC或控制系統中時，傳感器將幫助您更好地管理停機時間，優化維護計劃并避免機器資產出現無法預料的災難性故障。

177230-01-01-CN本特利振動探頭
螺柱和適配器：
89139-01 M-M-28 UNF至-24 UNF標準螺栓
128038-01 M-M-28 UNF至-24六角板螺栓（1-“X 0.25”）
146396-01 F-M-18 NPT至-28適配器
146394-01 F-M-28 UNF至-18 NPT適配器
37439-01 F-M-28 UNF至-28 UNF安裝底座
164373 M-M-28 UNF至-28 UNF標準螺栓，帶黃銅
135826-01 M-M-28 UNF到M10 X 1.0標準螺栓

177230地震變送器結合了可靠的基本保護解決方案
在GE產品的支持和服務下。該傳感器是一種簡單的環路供電設備，易于安裝和維護可降低培訓和服務成本。當集成到整個工廠資產狀況監測解決方案的PLC或控制系統中時，傳感器將幫助您更好地管理停機時間，優化維護計劃并避免機器資產出現無法預料的災難性故障。

Bently Nevada* Asset Condition Monitoring
Description：
The 177230 Seismic Transmitter combines a reliable basic protection solution 
with the support and service of GE products. The transducer is a simple, looppowered device whose ease of installation and maintenance may reduce 
training and service costs. When integrated into the PLC or controls system of an 
overall plant asset condition monitoring solution, the transducer will help you 
better manage downtime, optimize maintenance planning, and avoid 
unforeseen catastrophic failures of machinery assets.
Features of the 177230 Seismic Transducer include:
· Ease of implementation and use
- Interfaces with PLCs and control systems (like DCS and 
SCADA) 
- Provides a quick learning curve for operations and 
maintenance –through a familiar interface similar to that 
for connecting other PLC or control system inputs 
- Requires no field configuration or adjustments
- Needs few additional parts for a complete system
- Includes technical support for customers on how to 
monitor their equipment
- Includes self-test
- Incorporates protected interface
- Supports a variety of interface cables
· Data Quality
- Provides accurate and repeatable data 
- Uses simple data format 
- Provides raw vibration signal for verification and analysis
· EHS Compliant
- Implements safe and ergonomic design
- Supports access to hazardous areas
· Incorporates robust CM design for reliability
· Implements Industry standard 4 to 20mA loop-powered transmitter