INCOFLUXR 4 埋弧焊劑

INCOFLUX 4 埋弧焊劑是一種燒結焊劑，設計與INCONEL 82焊絲匹配使用，INCONEL 82焊絲是一種含鉻20％的高鎳合金。這種焊劑的典型應用是INCONEL600／601合金、INCOLOY 800合金相互之間及它們與鐵素體金屬材料之間的開坡口焊接。這種焊絲和焊劑的匹配尤其適用于碳鋼與不銹鋼之間的焊接，因為其熔敷金屬具有最優的熱脹系數。這種焊劑的另一個主要應用是與INCONEL 82填充金屬相匹配，在碳鋼表面堆焊形成耐蝕耐氧化層。

儲藏和干燥條件

焊劑密封在未開啟的容器中可以無限期保存。如果焊劑暴露于潮濕環境中，可以在500^oF保溫烘干2小時或600^oF保溫烘干1小時后使用。

The INCOFLUX 4 submerged arc welding agent is a sintering flux, which is designed to be used with INCONEL 82 welding wire. INCONEL 82 welding wire is a high nickel alloy with 20 % chromium. The typical application of this flux is INCONEL600/601 alloy, INCOLOY 800 alloy, and their welding between them and ferritic metal materials. This kind of wire and flux matching is especially suitable for welding between carbon steel and stainless steel because of its optimal thermal expansion coefficient. Another major application of this flux is the matching of the INCONEL 82 filler metal to the surface of carbon steel.

Welding parameters: open groove welding or surfacing: apply DCEP current and narrow weld path

Electrode dry extension flux layer thickness of wire diameter current/ampere voltage/v welding speed electrode

0.062 in

1.6 mm 240-290 30-33 8-11 in/min

In 200-280 - mm/min 7/8-1

1/2-1 in 22 to 25 mm

13 to 25 mm

0.093 in

2.4mm 250-300 30-33 8-11 in/min

In 200-280 - mm/min 7/8-1

22-25 mm 3/4-5/4 in

19 to 32 mm

Electrode swing surfacing welding: the use of DCEN current mode, when the wire diameter is 0.062 in, the oscillation frequency is 50-70 weeks/min; When the wire diameter is 0.093 in, the oscillation frequency is 35-60 weeks/min

0.062 in

1.6 mm 240-2632-34 4 in/min

100 mm/min in 7/8-1

1/2-1 in 22 to 25 mm

13 to 25 mm

0.093 in

2.4mm 300-400 34-37 4 in/min

100 mm/min in 7/8-1

22-25 mm 3/4-5/4 in

19 to 32 mm

Storage and drying conditions

The flux seals can be kept indefinitely in unopened containers. If the solder is exposed to wet conditions, it can be used after an hour of thermal insulation drying for 2 hours or 600oF.

Flux particle size

Taylor's mesh: 10 times 100

packaging

The barrel cover is covered with a 60 - pound polyethylene barrel sealed with rubber gasketINCOFLUXR 4 埋弧焊劑與INCONEL 82焊絲匹配INCOFLUXR 4 埋弧焊劑與INCONEL 82焊絲匹配INCOFLUXR 4 埋弧焊劑與INCONEL 82焊絲匹配INCOFLUXR 4 埋弧焊劑與INCONEL 82焊絲匹配INCOFLUXR 4 埋弧焊劑與INCONEL 82焊絲匹配