NILOR CF42 焊絲

NILO CF42 焊絲主要用于NILO 42合金的熔化極氣體保護焊、鎢極氣體保護焊和埋弧焊。NILO CF42 填充金屬與NILO 42合金一樣具有較低的熱脹特性，這防止的了凝固裂紋和再熱裂紋的產生。當這種焊絲用于噴射過渡的GMAW焊接過程時，推薦使用氬氣作為保護氣體；當用于GMAW脈沖焊接和短弧焊接時，推薦使用氬氣和25％氦氣混合氣體作保護氣；當用于SAW焊接時應當使用INCOFLUX 6焊劑。

直焊絲的長度為：915mm(36”)或1000mm(39”)

NILO CF42 electrode is mainly used in the welding of the melting electrode of NILO 42 alloy, the welding of tungsten electrode gas and the submerged arc welding. The NILO CF42 filler metal has the same low thermal expansion properties as NILO 42 alloy, which prevents the production of solidified cracks and reheat cracks. When this wire is used for the GMAW welding process of spray transition, argon is recommended to protect the gas. When used for GMAW pulse welding and short arc welding, it is recommended to use argon gas and 25% helium mixture to protect gas. INCOFLUX 6 flux shall be used when used for SAW welding.

Specifications without

Typical chemical Ni... ... 41

Element Fe......... ... ... 58

C............ ... 0.2

Mn............ 0.4

Nb... .... ... 1.2

Typical mechanical tensile strength, psi 80,000

Properties of 550 Mpa

Yield strength (0.2% offset), psi 60,000

414 Mpa

Extension, (4d)% 25

The impact strength (ft-lbs) 41

(70 of) (Joules) 56

Product form

Diameter of wire coil wire: 0.045 "straight wire diameter: 3/32"

The length of straight wire is: 915mm(36 ") or 1000mm(39 ").