Omron限位開關Enclosed Switch D4C-1201

	價格：380 元(人民幣)	產地：上海
	最少起訂量：1件	發貨地：上海
	上架時間：2017-09-01 12:41:27	瀏覽量：1146
	上海穆克自動化工程有限公司
	經營模式：貿易公司	公司類型：私營獨資企業
	所屬行業：低壓電器	主要客戶：
	在線咨詢

聯系方式

聯系人:蔣淵 (先生)	手機:13761364216
電話:	傳真:
郵箱:mokauto@163.com	地址:上海年家浜路460號

詳細介紹

D4C-1201

通用直立型, 標準敏度, 一般負載, IP67, 快動, 自復位機構, 單極雙投型, 1c, 柱塞型, VCTF 耐油電纜 4芯 3m

形狀?結構傳動器電氣額定接點構成負載電纜規格防護等級

通用直立型

插針柱塞型
φ10 不銹鋼柱塞型

AC250V 5A
DC30V 4A

1c

一般負載

VCTF 耐油電纜 3m

IP67

Omron-D4C-1201-6
Omron-D4C-1201-1
Omron-D4C-1201-2
Omron-D4C-1201-3
Omron-D4C-1201-4

形狀?結構壽命傳動器電氣額定額定頻率接點構成負載開關能力（AC）／無電感負載開關能力（AC）／電感負載開關能力（DC）／無電感負載開關能力（DC）／電感負載容許浪涌電流保護回路接地端子電纜規格環境溫度范圍環境濕度范圍

通用直立型

一般型

插針柱塞型
φ10 不銹鋼柱塞型

AC250V 5A
DC30V 4A

50/60 Hz

1c

一般負載

額定電壓: AC125V / 電阻負載: 5A(NC) 5A(NO) / 燈負載: 1.5A(NC) 0.7A(NO)
額定電壓: AC250V / 電阻負載: 5A(NC) 5A(NO) / 燈負載: 1A(NC) 0.5A(NO)

額定電壓: AC125V / 電感負載: 3A(NC) 3A(NO) / 電動機負載: 2.5A(NC) 1.3A(NO)
額定電壓: AC250V / 電感負載: 2A(NC) 2A(NO) / 電動機負載: 1.5A(NC) 0.8A(NO)

額定電壓: DC8V / 抵抗負荷: 5A(NC) 5A(NO) / 燈負載: 2A(NC) 2A(NO)
額定電壓: DC14V / 抵抗負荷: 5A(NC) 5A(NO) / 燈負載: 2A(NC) 2A(NO)
額定電壓: DC30V / 抵抗負荷: 4A(NC) 4A(NO) / 燈負載: 2A(NC) 2A(NO)
額定電壓: DC125V / 抵抗負荷: 0.4A(NC) 0.4A(NO) / 燈負載: 0.05A(NC) 0.05A(NO)
額定電壓: DC250V / 抵抗負荷: 0.2A(NC) 0.2A(NO) / 燈負載: 0.03A(NC) 0.03A(NO)

額定電壓: DC8V / 感性負載: 5A(NC) 4A(NO) / 電動機負載: 3A(NC) 3A(NO)
額定電壓: DC14V / 感性負載: 4A(NC) 4A(NO) / 電動機負載: 3A(NC) 3A(NO)
額定電壓: DC30V / 感性負載: 3A(NC) 3A(NO) / 電動機負載: 3A(NC) 3A(NO)
額定電壓: DC125V / 感性負載: 0.4A(NC) 0.4A(NO) / 電動機負載: 0.05A(NC) 0.05A(NO)
額定電壓: DC250V / 感性負載: 0.2A(NC) 0.2A(NO) / 電動機負載: 0.03A(NC) 0.03A(NO)

常閉電路(NC): 20A
常開電路((NO): 10A

防止觸電保護等級: Class I (帶接地線)
短路保護裝置: 10A保險絲 gI 或gG (IEC60269)

帶接地線

VCTF 耐油電纜 3m

使用時: -10～70℃
(無氷結)

使用時: 35～95%RH
(無結露)

容許操作速度容許操作頻率（機械）容許操作頻率（電氣）接觸電阻 (初始值)絕緣電阻耐電壓沖擊耐電壓耐久性（機械）耐久性（電氣）耐振動（誤動作）耐沖擊（耐久）耐沖擊（誤動作）污染度防護等級

0.1mm/s～0.5m/s

120次/分以下

30次/分以下

300mΩ以下

100MΩ以上
(用DC500V兆歐表)

同極端子間: AC1000V 50/60Hz 1min
充電金屬部與外殼間: AC1500V 50/60Hz 1min
各端子與非充電金屬部間: AC1500V 50/60Hz 1min

充電金屬部與外殼間: 2.5kV
各端子與非充電金屬部間: 2.5kV

1000萬次以上
(溫度、濕度條件: 5～35℃、40～70%RH)

20萬次以上 (AC125V 5A)
(溫度、濕度條件: 5～35℃、40～70%RH)

10～55Hz 雙振幅 1.5mm

最大1000m/s**2

最大500m/s**2

3 (EN60947-5-1)

IP67

動作所必需的力（OF）復位力（RF）預行程（PT）過行程（OT）應差行程（MD）動作位置（OP）

標準值最大 11.77N

標準值最小 4.41N

標準值最大 1.8mm

標準值最小 3mm

標準值最大 0.2mm

標準值 15.7±1mm

• Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved models.)

• Sealing characteristics that meet IEC IP67 degree of protection.

• Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and diaphragm; switch section sealed via nitrile rubber cap; cable entrance sealed via encapsulating material.

• Cable lengths of 3 and 5 m available on standard models. Models also available with UL and CSA-certified cables.

• Multiple mounting possible with Switches with Plungers.

• Models with red LED indicators added to series for easy confirmation of operation. (Set by default to light for non-operation.)

• VCTF oil-resistant cables with CE marking. (Applicable only to standard models.)

Standard Switches with No Operation Indicator

ActuatorRatingsStandard loadMicroload5 A at 250 VAC, 4 A at 30 VDC0.1 A at 125 VAC, 0.1 A at 30 VDCCableVCTF oil-
resistant
cable *1VCTF cable
*2SJT(O)
cable
*3VCTF oil-
resistant
cable *1VCTF cable
*2Cable
length (m)ModelPin plunger 324_lu_1_1

35Roller plunger 324_lu_1_2

35Crossroller
plunger 324_lu_1_3

35Roller lever 324_lu_1_4

35Roller lever,
high-sensitivity 324_lu_1_5

35Sealed pin
plunger 324_lu_1_6

35Sealed roller
plunger 324_lu_1_7

35Sealed
crossroller
plunger 324_lu_1_8

35Plastic rod 324_lu_1_9

35Center roller
lever 324_lu_1_10

35

D4C-1201	D4C-1401	D4C-1601	D4C-4201	D4C-4401
D4C-1301	D4C-1501	D4C-1701	D4C-4301	D4C-4501
D4C-1202	D4C-1402	D4C-1602	D4C-4202	D4C-4402
D4C-1302	D4C-1502	D4C-1702	D4C-4302	D4C-4502
D4C-1203	D4C-1403	D4C-1603	D4C-4203	D4C-4403
D4C-1303	D4C-1503	D4C-1703	D4C-4303	D4C-4503
D4C-1220	D4C-1420	D4C-1620	D4C-4220	D4C-4420
D4C-1320	D4C-1520	D4C-1720	D4C-4320	D4C-4520
D4C-1224	D4C-1424	D4C-1624	D4C-4224	D4C-4424
D4C-1324	D4C-1524	D4C-1724	D4C-4324	D4C-4524
D4C-1231	D4C-1431	D4C-1631	D4C-4231	D4C-4431
D4C-1331	D4C-1531	D4C-1731	D4C-4331	D4C-4531
D4C-1232	D4C-1432	D4C-1632	D4C-4232	D4C-4432
D4C-1332	D4C-1532	D4C-1732	D4C-4332	D4C-4532
D4C-1233	D4C-1433	D4C-1633	D4C-4233	D4C-4433
D4C-1333	D4C-1533	D4C-1733	D4C-4333	D4C-4533
D4C-1250	D4C-1450	D4C-1650	D4C-4250	D4C-4450
D4C-1350	D4C-1550	D4C-1750	D4C-4350	D4C-4550
D4C-1260	D4C-1460	D4C-1660	D4C-4260	D4C-4460
D4C-1360	D4C-1560	---	D4C-4360	D4C-4560

Note: 1. Models are available separately with resistance to viscous oils (oil drain holes are provided), but only with
Plunger Models. Add "-M" to the model number (example: D4C-1202 would be D4C-1202-M). Ask your nearest
OMRON representative for details.
2. Switches with variable roller levers are also available. Ask your nearest OMRON representative for details.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables; approved by EN and IEC.
*3. Switches with SJT(O) Cables (cables approved by UL and CSA) are approved by UL and CSA.

Standard Switches with Operation Indicator (Red)

ActuatorRatings5 A at 125 VAC4 A at 30 VDCCableVCTF oil-resistant
cable *1VCTF cable
*2VCTF oil-resistant
cable *1VCTF cable
*2Cable length (m)ModelPin plunger 324_lu_2_1

35Roller plunger 324_lu_2_2

35Crossroller
plunger 324_lu_2_3

35Roller lever 324_lu_2_4

35Roller lever,
high-sensitivity 324_lu_2_5

35Sealed pin
plunger 324_lu_2_6

35Sealed roller
plunger 324_lu_2_7

35Sealed
crossroller
plunger 324_lu_2_8

35Plastic rod 324_lu_2_9

35Center roller
lever 324_lu_2_10

35

D4C-2201	D4C-2401	D4C-3201	D4C-3401
D4C-2301	D4C-2501	D4C-3301	D4C-3501
D4C-2202	D4C-2402	D4C-3202	D4C-3402
D4C-2302	D4C-2502	D4C-3302	D4C-3502
D4C-2203	D4C-2403	D4C-3203	D4C-3403
D4C-2303	D4C-2503	D4C-3303	D4C-3503
D4C-2220	D4C-2420	D4C-3220	D4C-3420
D4C-2320	D4C-2520	D4C-3320	D4C-3520
D4C-2224	D4C-2424	D4C-3224	D4C-3424
D4C-2324	D4C-2524	D4C-3324	D4C-3524
D4C-2231	D4C-2431	D4C-3231	D4C-3431
D4C-2331	D4C-2531	D4C-3331	D4C-3531
D4C-2232	D4C-2432	D4C-3232	D4C-3432
D4C-2332	D4C-2532	D4C-3332	D4C-3532
D4C-2233	D4C-2433	D4C-3233	D4C-3433
D4C-2333	D4C-2533	D4C-3333	D4C-3533
D4C-2250	D4C-2450	D4C-3250	D4C-3450
D4C-2350	D4C-2550	D4C-3350	D4C-3550
D4C-2260	D4C-2460	D4C-3260	D4C-3460
D4C-2360	D4C-2560	D4C-3360	D4C-3560

Note: Ask your nearest OMRON representative for information on Switching with approved international standards.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables.; approved by EN and IEC.

Standard Switches with Operation Indicator

ActuatorRatings0.1 A at 125 VAC0.1 A at 30 VDCCableVCTF oil-resistant cable *VCTF oil-resistant cable *Cable length (m)ModelPin plunger 324_lu_3_1

35Roller plunger 324_lu_3_2

35Crossroller plunger 324_lu_3_3

35Roller lever 324_lu_3_4

35Roller lever, high-sensitivity 324_lu_3_5

35Sealed pin plunger 324_lu_3_6

35Sealed roller plunger 324_lu_3_7

35Sealed crossroller plunger 324_lu_3_8

35Plastic rod 324_lu_3_9

35

D4C-5201	D4C-6201
---	D4C-6301
D4C-5202	D4C-6202
D4C-5302	D4C-6302
D4C-5203	D4C-6203
D4C-5303	D4C-6303
D4C-5220	D4C-6220
D4C-5320	D4C-6320
D4C-5224	D4C-6224
D4C-5324	D4C-6324
---	D4C-6231
---	D4C-6331
D4C-5232	D4C-6232
D4C-5332	D4C-6332
---	D4C-6233
---	D4C-6333
D4C-5250	D4C-6250
D4C-5350	D4C-6350

Note: Ask your nearest OMRON representative for information on Switching with approved international standards.
* Oil-resistant vinyl cabtire cables; approved by EN and IEC.

Pre-wired Models (Use VCTF Oil-resistant Cable)

ActuatorRatings1 A at 125 VAC1 A at 30 VDCOperation
indicatorWithout operation
indicatorWith operation
indicatorWithout operation
indicatorWith operation
indicatorPin plunger 324_lu_4_1

Roller plunger 324_lu_4_2

Sealed plunger 324_lu_4_3

Sealed roller
plunger 324_lu_4_4

Roller lever
(high-sensitivity
model) 324_lu_4_5

---	---	---	D4C-3001-DK1EJ[]
D4C-1002-AK1EJ[]	D4C-2002-AK1EJ[]	D4C-1002-DK1EJ[]	D4C-3002-DK1EJ[]
---	---	---	D4C-3031-DK1EJ[]
---	---	D4C-1032-DK1EJ[]	D4C-3032-DK1EJ[]
---	D4C-2024-AK1EJ[]	D4C-1024-DK1EJ[]	D4C-3024-DK1EJ[]

Note: 1. The [] contains the length of the cable.
For example: 30 cm → D4C-2002-AK1EJ03
2. M1J models are also available. Contact your OMRON sales representative for further information.
3. Of the above model numbers, some with special specifications are not registered.

Weather-resistant Models

ActuatorOperation indicatorWithout operating indicationWith operating indicationRatingsStandard loadMicroloadStandard load5 A at 250 VAC
4 A at 30 VDC0.1 A at 125 VAC
0.1 A at 30 VDC5 A at 125 VAC4 A at 30 VDCVCTF oil-resistant cableCable length (m)ModelRoller lever 324_lu_5_1

35Roller lever
(high-sensitivity model) 324_lu_5_2

35Adjustable roller lever 324_lu_5_3

35Adjustable rod lever 324_lu_5_4

35


D4C-1220-P	D4C-4220-P	D4C-2220-P	D4C-3220-P
D4C-1320-P	---	---	---
D4C-1224-P	D4C-4224-P	D4C-2224-P	D4C-3224-P
D4C-1324-P	D4C-4324-P	D4C-2324-P	D4C-3324-P
D4C-1227-P	D4C-4227-P	D4C-2227-P	D4C-3227-P
D4C-1327-P	D4C-4327-P	D4C-2327-P	D4C-3327-P
D4C-1229-P	D4C-4229-P	---	D4C-3229-P
D4C-1329-P	---	D4C-2329-P	D4C-3329-P

Note: Silicon rubber is used to increase resistance to the environment. Silicon rubber, however, can generate silicon gas.
(This can occur at room temperature, but the amount of silicon gas generated increases at higher temperatures.)
Silicon gas will react as a result of arc energy and form silicon oxide (SiO2). If silicon oxide accumulates on the
contacts, contact interference can occur and can interfere with the device. Before using a Switch, test it under actual
application conditions (including the environment and operating frequency) to confirm that no problems will occur in
actual.

Applicable Cables

TypeFor ACFor DCAppearanceNo. of conductorsCable lengthModelModelStraight

42 m5 m

XS2F-A421-D90-F	XS2F-D421-D80-F
XS2F-A421-G90-F	XS2F-D421-G80-F

Mounting Plates (Order Separately)

The WL/WL-N model incorporated by equipment can be replaced with the D4C together with the Mounting Plate without changing the position of the dog or cam.

List of Replaceable Models

WL/WL-N model (Actuator)D4C model (Actuator)Plate

WLD/WL01D/WLD18-N (Top plunger)	D4C-[][]01 (Plunger)	D4C-P001
WLD2/WL01D2/WLD28-N (Top roller plunger)	D4C-[][]02 (Roller plunger)	D4C-P002
WLCA2/WL01CA2/WLCA2-N (Roller lever)	D4C-[][]20 (Roller lever)	D4C-P020

Note: The WL01[] is for micro loads.

Example of Replacement

Note: The position of the dog remains unchanged.

Individual Parts

Head/Actuator

ActuatorActuator

Head (with actuator)
Pin plunger	D4C-0001	---
Roller plunger	D4C-0002	---
Crossroller plunger	D4C-0003	---
Roller lever	D4C-0020	WL-1A100
Roller lever (weather-resistant model)	---	WL-1A100P1
Roller lever (high-sensitivity model)	D4C-0024	WL-1A100
Variable roller lever	D4C-0027	---
Variable rod lever	D4C-0029	HL-1HPA500
Sealed pin plunger	D4C-0031	---
Sealed roller plunger	D4C-0032	---
Sealed crossroller plunger	D4C-0033	---
Plastic rod	D4C-0050	---
Center roller lever	D4C-0060	---

Note: 1. The model numbers for heads are of the form D4C-00[][], with the numbers in the squares indicating the type of
actuator.
2. Actuators for plunger models, plastic rod models, and center roller lever models cannot be ordered individually.

They must be ordered together with the head.