產品描述：
德國Erler zimmer ECMO體外氧合訓練模擬器。這個訓練模型的特點是動脈和靜脈循環，都使用自動泵操作，可以調節流量和脈動率。一個真實的病人可以模擬手術過程中可能發生的所有情況。
產品特點：
該機型適用于VA- ecmo和VV-ECMO。穿刺和插管可以使用真實的材料和儀器進行。動脈有8毫米的管腔，靜脈是10毫米。這使得普通導管的使用沒有任何問題。穿刺墊(左、右股靜脈穿刺部位各1個，頸靜脈穿刺部位1個)由可超聲材料制成。這使得超聲控制針頭直到它到達血管管。Trainer可以與真正的ECMO機器一起使用，并提供真實的流體體積，以實際操作的機器。訓練器也有4導聯心電圖的接觸點。接觸點可以連接到ECG模擬器(不包括)。靜脈也有用于流量測量的連接器。

操作事項：
由于普通套管直徑大，拔管后會留下較大的穿刺孔，因此模擬器具有集成的導管管理系統，可以在幾秒鐘內更換血管套管，避免了因血管更換而損失寶貴的培訓時間。油管儲層無形地集成到模型底座中，底座也作為運輸箱的下部與小車滾輪一起工作。水庫和水泵系統是分開的，可以通過快速鎖定連接器輕松地連接到訓練器。

產品描述：Simulator for training of extracorporeal Oxygenation. This training model features an arterial and venous circulation, both operated with automated pumps which can be adjusted in flow volume and pulsating rate. A real patient can be simulated with all possible conditions that may happen during the procedure. The model is suitable for VA- and VV-ECMO. The puncture and cannulation can be practiced using real materials and instruments. The arteries do have a lumen of 8 mm, the veins of 10 mm. This allows the use of common catheter types without any problems. The puncture pads (one each at left and right femoral puncture site and one at the jugular puncture site) are made of ultrasound capable material.

This allows ultrasound control of the needle until it reaches the vessel tube. The Trainer can be used with a real ECMO machine and provides realistic fluid
volume for realistic operation of the machine. The trainer also has contact points for 4-lead ECG. The contact points can be connected to a ECG simulator (not included). The veins also do have connectors for flow rate measurement.

Because of the big diameters of the common cannulas big puncture holes are left after withdrawing the cannula, so the simulator has an integrated tube management system that allows the replacement of the vessel tubes within a few seconds and avoids the loss of precious training time due to vessel replacement. The tubing reservoirs are integrated into the models base invisibly, the base also works as lower part of the transport case with trolley rollers. The water reservoir and pump system are separated and can be connected to the trainer easily by quick lock connectors.