Cleco MA3 Series Radial Piston Power Motors-PLC信息網

PLC企業資訊

Cleco MA3 Series Radial Piston Power Motors

發布者：QZDFWendy 發布時間：2021-09-13 08:51:37

PL70-1046EN
07/08/2013
Cleco ®
General Information
For this Instruction Manual
This Instruction Manual is the Original Instruction Manual intended for all persons who will operate and maintain
these tools.
This Instruction Manual
provides important notes for the safe and efficient use of these tools. ?
describes the function and operation of the MA3 series tools. ?
serves as a reference guide for technical data, service intervals and spare parts ordering. ?
provides information on optional equipment. ?
Identification text:
MA3 represents all models of the radial piston power motor as described in this manual
ú indicates a required action
? indicates a list
<..> indicates a reference number from the exploded parts drawings
Arial indicates an important feature or instruction written in Arial Bold
Identification graphic:
￠ indicates a directional movement

ò indicates a function or force

Cleco ®
Nomenclature
@ Max. HP Free Speed ft. lbs. Nm ft. lbs. Nm lbs. kg cfm m3/min lbs. kg
MA3S358M 1300 2600 24 33 13 18 49 22.2 90 2.55 ---- 750 340
MA3S372M 200 400 155 210 84 114 65 29.5 90 2.55 6.5:1 2560 1161
MA3S370M 104 200 299 405 161 218 65 29.5 88 2.49 12.5:1 2560 1161
MA3S360M 53 100 588 797 317 430 65 29.5 97 2.74 24.6:1 2560 1161
MA3R359M 1190 2600 24 33 13 18 51 23.1 80 2.27 ---- 750 340
MA3R373M 183 400 155 210 84 114 67 30.1 87 2.46 6.5:1 2560 1161
MA3R371M 95 200 299 405 161 218 67 30.1 90 2.55 12.5:1 2560 1161
MA3R361M 48 100 588 797 317 430 67 30.1 95 2.69 24.6:1 2560 1161
MA3W406M 1190 2600 24 33 13 18 51 23.1 80 2.27 ---- 750 340
MA3W409M 183 400 155 210 84 114 67 30.1 87 2.46 6.5:1 2560 1161
MA3W408M 95 200 299 405 161 218 67 30.1 90 2.55 12.5:1 2560 1161
MA3W407M 48 100 588 797 317 430 67 30.1 95 2.69 24.6:1 2560 1161
* Note: All non-geared models assume overhung load located at 0.625" (15.88mm) from the face of the motor.
All geared models assume overhung load located at 1.000" (25.40mm) from the face of the motor.
**Note: These motors must be operated with sufficient load to prevent speed from exceeding maximum allowable speed.