山東銀焊條包郵全國飛機牌銀焊條-PLC信息網

PLC企業資訊

山東銀焊條包郵全國飛機牌銀焊條

發布者：hmhjht 發布時間：2019-12-14 16:46:36

Silver brazing 銀釬焊	QJ101	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃. 在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
	QJ102	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. 在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
	QJ102A	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration. 在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊
	QJ112	Silver brazing paste flux 膏狀銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. 在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
	QJ103	Silver brazing flux 銀釬焊熔劑	Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃. 在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
Aluminum brazing 鋁釬焊	QJ201	Aluminum brazing flux 鋁釬焊熔劑	Brazing flux of aluminum and aluminum alloys within 450-620℃. 在450-620℃范圍釬焊鋁及鋁合金的助熔劑
Aluminum brazing 鋁釬焊	QJ207	Aluminum brazing flux 鋁釬焊熔劑	Brazing flux of aluminum and aluminum alloys within 560-620℃. 在560-620℃范圍釬焊鋁及鋁合金的助熔劑

Category 類別	Trade- mark 牌號	Chemical composition 化學成份(%)	Hardness 硬度	Application 用途
Oxy- Acetylene Flame spray- using 氧乙炔焰噴焊	F103	Cr10 B1.5 Si3 Ni Rem.	HRc 25	Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide. 鑄鐵件的噴焊，如玻璃模具，汽缸、導軌
	F101	Cr10 B2.5 Si3 Ni Rem.	HRc 45	Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump. 耐磨、耐蝕件的噴焊，如閥門、泵轉子、泵柱塞
	F101Fe	Cr10 B2.5 Si3 Fe10 Ni Rem.	HRc 45	Spray-fusing of corrosion-resistant parts, such as axle and stigma. 耐磨件的噴焊，如軸類、汽門
	F102	Cr16 B4 Si4 Ni Rem.	HRc 60	Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston. 耐磨、耐蝕、抗高溫氧化工件的噴焊，如模具、柱塞
	F102Fe	Cr16 B4 Si4 Fe15 Ni Rem.	HRc 60	Spray-fusing of corrosion-resistant parts, such as axle and cold die. 耐磨件的噴焊，如軸類、冷模具
	F105	F102+50%WC	HRc 60	Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan. 抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片
	F105Fe	F102Fe+35%WC	HRc 60	Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan. 抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片
	F108	F102+80%WC	HRc 60	Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger. 抗強烈磨粒磨損，無需加工場合的噴焊，如挖泥船耙齒
	F301	Cr5 B4 Si4 Ni30 Fe Rem.	HRc 45	Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree. 農機,礦山機械易損件的噴焊，如齒輪，車軸
	Track iron powder 軌鐵粉	Cr5 B1.5 Si3 Ni30 Fe Rem.	HRc 28	Repair spray-fusing of defects such as scratch and concavity of railroad track. 鐵路鋼軌擦傷、低塌等缺陷的修復噴焊
Oxy-acetylene flame spraying 氧乙炔焰噴涂	F111	Cr5 B1.5 Si3 Ni30 Fe Rem.	HB 150	Spraying of bearing and cutting parts etc. 軸承、切削件等的噴涂
	F113	Cr10 B1.5 Si3 Ni Rem.	HB 250	Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance. 噴涂亦可噴焊，如滾筒、柱塞、耐蝕耐磨軸等
	F313	Cr15 B1.5 Fe Rem.	HB 250	Spraying of dryer of papermaking and axle. 造紙烘缸、軸類的噴涂
	F314	Cr18 Ni9 B1.5 Fe Rem.	HB 250	Spraying of axle. 軸類噴涂
	F412	Sn10 P0.3 Cu Rem.	HB 80	Spraying of axle and bearing. 軸、軸承的噴涂
	F512	復合Al5Ni95		Backing spray of transition layer between base and working layer. 噴涂層的基體與工作層之間過渡（打底）層用噴涂
PTA hardfacing 等離子弧噴焊	F221	Cr26 W5 B0.7 Co Rem.	HRc 43	PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool. 高溫高壓閥門密封面、熱剪切刃口的等離子噴焊
	F223	Cr21 W5 B1.5 Co Rem.	HRc 40	PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower. 高溫下耐磨耐蝕件的噴焊，如高溫高壓閥門、鼓風機
	F321	Cr13 B1.5 Si1 Fe Rem.	HRc 45	PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc. 中溫中壓閥門的閘板及其他耐磨件的等離子噴焊
	F322	Cr23 Ni13 Si5 B1 Fe Rem.	HRc 40	PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc. 中溫中壓閥門的閥座及其他耐磨件的等離子噴焊
	F422	Sn10 P0.3 Cu Rem.	HB 80	PTA hardfacing of axle and bearing etc. 軸、軸承等離子噴焊

(1) HAG-2B銀焊條銀焊料含銀2%銀焊條銀焊料等同美標AWS BCuP-6銀焊條銀焊料、國標BCu91PAg銀焊條銀焊料及L209銀焊條銀焊料，具有良好的流動性和填充能力，廣泛用于空調、冰箱、機電等行業，銅及銅合金的釬焊。熔點645-790攝氏度。

(2)HAG-5B銀焊條銀焊料含銀5%銀焊條銀焊料等同于美標AWS BCuP-3銀焊條銀焊料國標BCu88PAg銀焊條銀焊料及L205銀焊條銀焊料，有一定塑性，適用不能保持緊密配合的銅及其合金接頭的焊接。熔點645-815攝氏度。
(3)HAG-15B銀焊條銀焊料含銀15%銀焊條銀焊料等同于美標AWS BCuP-5銀焊條銀焊料國標BCu80AgP銀焊條銀焊料及L204銀焊條銀焊料，具有接頭塑性好，導電性提高，特別適用間隙不均場合。可釬焊承受振動載荷的銅及其合金接頭的釬焊。熔點645-800攝氏度。
銀銅鋅環保焊料（銀釬料）牌號及性能簡介
牌號                   性能簡介
(1) HAG-18BSn銀焊條銀焊料含銀18%銀焊條銀焊料是銀、銅、鋅、錫合金，熔化范圍稍高，潤濕性和填充性良好，價格經濟。可焊接銅、銅合金、鋼等材料。熔點770-810攝氏度。
(2) HAG-25B銀焊條銀焊料含銀25%銀焊條銀焊料等同于國標BAg25CuZn銀焊條銀焊料及L302銀焊條銀焊料，是銀、銅、鋅、合金，具有較好的潤濕性和填充性，但熔點稍高，可焊銅、鋼等材料。熔點700-800攝氏度。
(3)HAG-25BSn銀焊條銀焊料含銀25%銀焊條銀焊料等同于美標AWS BAg-37，是銀、銅、鋅、錫合金，熔點低于HAg-25B銀焊條銀焊料,提高了潤濕性和填充性。可焊銅、鋼等材料。熔點680-780攝氏度。
(4)HAG-30B銀焊條銀焊料含銀30%銀焊條銀焊料等同于美標AWS BAg-20銀焊條銀焊料，國標BAg30CuZn銀焊條銀焊料 ,是銀、銅、鋅合金，熔點稍高，接頭有較好韌性，可釬焊銅、銅合金、鋼等材料。熔點677-766攝氏度。
(5)HAG-35B銀焊條銀焊料含銀35%銀焊條銀焊料等同于美標AWS BAg-35銀焊條銀焊料，是銀、銅、鋅合金，中等熔化溫度，接頭有較好韌性，可釬焊銅、銅合金、鋼等材料。熔點621-732攝氏度。
(6) HAG-35Sn銀焊條銀焊料含銀35%銀焊條銀焊料等同于國標BAg34CuZnSn銀焊條銀焊料，是銀、銅、鋅、錫合金，中等熔化溫度，有較好的流動性，更適用于鐵素體和非鐵素體鋼的焊接。熔點620-730攝氏度。
(7) HAG-40B銀焊條銀焊料含銀40%銀焊條銀焊料是銀、銅、鋅、合金，具有較好的流動性、滲透性和韌性，熔點677-732攝氏度。
(8)HAG-40BNi銀焊條銀焊料含銀40%銀焊條銀焊料是銀、銅、鋅、鎳合金，等同于美標AWS BAg-4銀焊條銀焊料，具有較好的抗蝕性、適用于不銹鋼的焊接和鎳基合金及炭化鎢的焊接，熔點670-780攝氏度。