|
|
|
K-329T
|
|
E2209T1-1/4
|
|
-
|
|
-
|
|
K-329T is formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless steels.The principal area of application is chemical plant and shipbuilding as well as nuclear plant industries.
|
|
|
|
|
K-347T
|
|
E347T1-1
|
|
YF347C
|
|
YF347C
|
|
K-347T is formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels.
|
|
|
|
|
K-409TiT
|
|
EC409
|
|
-
|
|
-
|
|
K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode.
|
|
|
|
|
K-410T
|
|
E410T0-1/-4
|
|
YF 410C
|
|
YF 410C
|
|
K-410T is designed for MAG welding of martensite stainless alloys of the 13%Cr types. It is used for surfacing of sealing faces of valves for gas,water, and steam piping system at service temperatures up to 450∑
|
|
|
|
|
K-410NiMoT
|
|
E410NiMoT0-4
|
|
-
|
|
-
|
|
K-410NiMoT is designed for MAG welding of soft-martensite stainless alloys of the 13%Cr-4%Ni-Mo types.
|
|
|
|
|
K-430T
|
|
E430T0-G
|
|
YF430G
|
|
YF430G
|
|
K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
|
|
|
|
|
K-436T
|
|
-
|
|
-
|
|
-
|
|
K-436T is designed for MAG welding of stainless steels of the 17%Cr-1% Mo-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
|
|
|
|
|
K-439T
|
|
-
|
|
-
|
|
-
|
|
K-439T is designed for MAG welding of stainless steels of the 18%Cr-1%Ti types.It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
|
|
|
|
|
K-309LF
|
|
E309LT0 -1/-4
|
|
YF309LC
|
|
YF309LC
|
|
K-309LF is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. Dissimilar joint welds ; of and between high-strength, mild steels and lowalloyed QT-steels, stainless, ferritic Cr-and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500Nbo
|
|
|
|
|
K-316LF
|
|
E316LT0-1/-4
|
|
YF316LC
|
|
YF316LC
|
|
K-316LF is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel.bo
|
|
